compliant features & benefits > wide variety of i/o confgurations ? 17 models with various discrete, analog and temperature i/o > powerful networking capabilities ? built-in two port ethernet switch for daisy chaining, redundancy, or pass-through ? modbus protocol support for industrial monitoring and communications > built-in security for proactively blocking unwanted access > rs-485 port for connecting serial devices to ethernet network e3 i/o ? modules red lion automation series rugged high-density i/o modules product highlights > confgurable via crimson 3.0 or web interface > wide variety of mixed i/o confgurations > industrial design supporting deployment in extreme environments > real-time ring and dual-ethernet ports for powerful network redundancy > built-in security proactively blocks unwanted access applications > mining > oil & gas > power & energy > transportation > water/wastewater > industrial design supporting deployment in extreme environments ? hardened metal enclosure with both din-rail and panel mount options ? wide -40 to 75c operating temperature range ? ul/cul class 1, division 2 listed > confgured via crimson software for easy point-and-click confguration or through built-in web interface red lions e3 i/o modules provide a robust and reliable platform for local and distributed monitoring and control of processes and equipment in harsh industrial environments. the highly rugged e3 i/o modules feature discrete, analog and temperature i/o, dual ethernet ports, an rs-485 serial port and one usb port. confgured via web interface or red lions award winning crimson ? 3.0 software, e3 i/o modules are easy to setup and deploy. the high-density i/o modules compliment hmis or can be used as standalone i/o concentrators in industries including oil & gas, water/wastewater, utilities, transportation, mining and maritime. red lions din-rail mountable modules support open-standard protocols simplifying integration into existing or newly installed networks. replacing external devices such as switches, data concentrators and protocol converters, e3 i/o modules cost-effectively streamline systems and improve reliability.
analog inputs* input range: 4-20 ma, 0-10 vdc, rtd, thermocouple and 250 mv analog/discrete resolution: 16 bits (0.003%); 10 bits (1 ms fast option) input impedance (resistance): 100 ohms or 200 kohms fuses: self-resetting short circuit protection (4-20 ma inputs) dmrr (differential mode): 66 db at 50/60 hz update time: 880 ms to 1 ms (configurable) temperature accuracy: +/-0.5c uncalibrated (typical) rtd type: 100 ohm platinum rtd alpha: 0.00385 or 0.00392 rtd connections: 2 or 3-wire rtd input range: -200 to 850c analog outputs* analog output range: 4-20 ma analog/discrete resolution: 16 bits (less than 1 ua) full scale accuracy: +/-0.02% (@20c) span and offset temperature: +/- 50 ppm per c load resistance: 0-750 ohms @ 24 vdc current limiting short circuit protection recommended wiring clearance front: 2 (5.08 cm) top: 1 (2.54 cm) environmental operating temperature range: -40 to +75c storage temperature: -40 to 85c operating humidity: 10% to 95% (non condensing) shock: iec60068-2-6 vibration: iec60068-2-27 certification & compliance hazardous locations: ansi/isa 12.12.01-2013 edition (class i, div. 2, groups a, b, c, and d), csa c22.2/213; marine/offshore: rated per abs, dnv and lloyds electrical safety: ul 508, csa c22.2/142, en/iec61010-1, ce emi emissions: fcc part 15, ices-003, class a, en-55022; en6100-6-4, ce emc immunity: en61000-6-2, ce (en61000-4-2,3,4,5,6,8); ce flammability: ul 94v-0 materials mechanical case dimensions: height: 5.30 (134.6 mm) width: 5.60 (142.2 mm) depth: 2.85 (72.4 mm) weight: 2.5 lb.s (1.3 kg) mount: din rail 35 mm mtbf: >1m hours** warranty 3 years on design and manufacturing defects * see manual for model specifc specifcations ** note: see hardware manual for model specifc mtbf ratings. e3 i/o module specifications switch properties operation: monitored ieee compliance: 802.3, 802.3u, 802.3ab, 802.3x 802.1d/d/w, 802.1p, 802.1q, 802.1x protocols: tcp/ip, arp, udp, icmp, dhcp, http, modbus tcp, modbus udp (slave or master), sixnet tcp, sixnet udp (slave or master) latency (typical): 5 us @ 100 mbps switching method: store-and-forward networks: 1 or 2 independent with unique mac and ip addresses real-time ring: 30 ms + 5ms per hop mdix auto sensing cable auto sensing speed and flow control power input* input voltage: 10-30 vdc (12-24 nominal) steady input current: maximum: 355ma @ 24vdc no loads average: 190ma @ 24vdc no loads minimum: 150ma @ 24vdc no loads max inrush: 5 a /100 us @ 24 vdc btu/hr: 8 (typical) connectors ethernet ports: two (2) 10/100base-t(x) rj45 ports serial port: one (1) rs-485 screw block (485+, 485-, gnd; 2-wire half-duplex, non-isolated) rs-485 networking: up to 32 (full load) stations rs-485 distance: up to 0.5 miles (baud-rate dependent) baud rates: 300 to 57,600 baud protocols: master and slave; sixnet and modbus rtu/ascii network media 10base-t: cat3 cable 100base-t(x): cat5 cable discrete inputs* voltage range: 10-30 vdc or 60-140 vac input resolution: 150 volts (16 channel modules only) input resistance: 10 kohms slow response: 25 ms (20 hz max count rate) fast response: 1 ms (400 hz max count rate) special fast counting: up to 50 khz (channel 1 & 2) count up: pulse timing and pulse rate 16 or 32-bit reporting discrete outputs* output voltage range: 10-30 vdc or vdc/ac maximum output power: up to .5 a per channel short circuit protection: self-reset fuses input isolation: 150 v (16 channel modules only) channel scan rate: 1 ms dimensions in inches (mm)
e3 i/o module order guide www.redlion.net connect. monitor. control. americas sales@redlion.net asia-pacifc asia@redlion.net europe middle east africa europe@redlion.net +1 (717) 767-6511 adld0427 051816 ? 2016 red lion controls, inc. all rights reserved. red lion, the red lion logo, n-tron and sixnet are registered trademarks of red lion controls, inc. all other company and product names are trademarks of their respective owners. ordering guide part number di do ai ao description e3-mix24880-1 24* 8* 8 32 channel combination i/o with 1 isolated input counter e3-mix24882-1 24* 8* 8 2 34 channel combination i/o with 2 analog outputs E3-MIX20884-1 20* 8* 8 4 32 channel combination i/o with 4 analog outputs and 4 isolated input counters e3-32di24-1 32 32 discrete inputs (10-30 vdc) including 16 multifunction counters e3-16di24-1 16 16 individually isolated discrete inputs (10-30 vdc) with counters e3-16diac-1 16 16 individually isolated discrete inputs (120 vac nominal; 10-30 vdc) with counters e3-32do24-1 32 32 discrete outputs (10-30 vdc) 0.5 amp each, 8 amps total e3-16do24-1 16 16 individually isolated discrete ouputs (10-30vdc) .5 amp outputs, 8 amps total e3-16dorly-1 16 16 individually isolated discrete outputs (10-30vdc/vac relay) .5 amp outputs, 8 amps total e3-32ai20m-1 32 32 analog inputs (4-20 ma) with 16-bit accuracy e3-32ai10v-1 32 32 analog inputs (0-10vdc) e3-16ai20m-1 16 16 analog inputs (4-20 ma) e3-8ao20m-1 8 8 analog outputs (4-20 ma) e3-16ai-8ao-1 16 8 24 channel combination, 16 analog inputs (4-20 ma) and 8 analog outputs (4-20 ma) e3-16isotc-1 16tc 16 individually isolated analog inputs (thermocouple and +/- 250 mv) with j, k, e, r, t, c, n, s e3-16iso20m-1 16 16 individually isolated analgo inputs (4-20 ma) e3-10rtd-1 10rtd 10 analog inputs (100 ohm platinum rtd), rang is -200 to 850 c * shared di/do combination ports. see manual for more information. as the global experts in communication, monitoring and control for industrial automation and networking, red lion has been delivering innovative solutions for over forty years. our automation, ethernet and cellular m2m technology enables companies worldwide to gain real-time data visibility that drives productivity. product brands include red lion, n-tron and sixnet. with headquarters in york, pennsylvania, the company has offces across the americas, asia-pacifc and europe. red lion is part of spectris plc, the productivity-enhancing instrumentation and controls company. for more information, please visit www.redlion.net .
|
